Description
MOSFET Technology for your vintage motorcycle. This is for use on ALL Motorcycles using 3 phase Stators (if unsure, check your stator – you will need to see 3 common colored wires coming from the stator windings) including motorcycles equipped with our 3 Phase PMA System for XS650’s
New technology in lighting (LED, Low Draw, etc) and other motorcycle components has come a long way, unfortunately the lower draw of these accessories over OEM High Draw Components means your old solid state or mechanical regulator is working overtime to shunt/dissipate the energy being created by your stator but not being used. Consider that a standard 55/65W Headlight is now being replaced with 5-10W LED Lights, and the same with brake lights, running lights, etc… – this energy has to go somewhere, that’s where MOSFET steps in.
MOSFET Technology Regulators run cooler than standard diode style regulators, In addition, this rectifier has overheat protection, rather than burn up it will simply turn off for a while and cool off – which protects valuable and expensive ignitions and batteries.
Rated at 350W, this regulator will be the workhorse in your charging system, without breaking a sweat.
We have been using this setup on our own personal XS650’s with our 3 Phase System with excellent results – even running all day with no lights at all (no draw) the regulator stays cool to the touch.
Mounting holes are 103mm Center to Center, and the body of the Regulator is 3.25 x 4.00 x 1.75″ in size.
doug –
works flawlessly on my xs650. Thanks hugh
Tim “Scrappy” B (verified owner) –
Exactly what I needed to pair up with the PMA, capacitor and LED lighting. Hugh was extremely helpful with his guidance that he offered me via his Instagram @hughshandbuilt Thanks again Hugh!