Hugh’s HandBuilt Crank Rebuild Services

Rebuilding the heart of your XS650 is critical and often the most overlook component in your build*.  We can rebuild your crank to OEM Specs, with new rods and bearings as needed, trued and ready to run – or we can build a hot-rod Rephased XS650 Crank for the speed demon inside of you.  Your choice, we don’t discriminate.

The Crank Rebuild Details:

First off, we disassemble your crank 100% – down to each needle bearing, rod pin, and flywheel…  This allows us to fully clean and inspect your components for wear/damage and fully assess the rebuild.  Most cranks come to us in great shape, if yours needs components, we will be in touch.  Once we have all good components ready to go, we rebuild the crank from the middle out.  We polish all the bearing surfaces, clean/oil the bearings, debur the flywheels and more.  We build these cranks for performance, and each pressed joint is trued and TIG welded* (for high RPM durability) as we build the crank.  Once the rods and outer flywheels are installed, the crank is fully trued in our fixures and given a final rod pin TIG Weld to each end for the ultimate in reliability and performance.  The crank is then ready to bolt in just like OEM.

The Labor Rates:

Crank labor is currently set at $375.  This does not include and parts that may be needed.  We do not mark up parts, we offer them to you at our cost.

Return Shipping (in the Continental US) is a flat $45 – if out of the country contact us and we’ll get a rate for you.

Ship it to us:

Ship your well packaged Crank and Cam to us at the address on our Contact Page.

Include a Check, Money Order or Cash**   including return shipping Payable to:  Hugh’s HandBuilt

Include a note inside the package with your FULL Contact Information.  Email, Name, Address and Phone Number.

Make sure to include which services you are requesting on the note.

Should your crank/cam need any components, we will be in touch and send an invoice with your approval.


*Failed Cranks – Why to properly build and weld an XS650 Crank

**All of our exchange services are based on cash/check/money order pricing.  If you prefer Paypal, we can process payments with a 4%  fee applied to the total.